home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d14
/
evga800.arc
/
README.DOC
< prev
next >
Wrap
Text File
|
1990-08-10
|
2KB
|
37 lines
The following instruction will install the video driver
for an installed version of Windows 3.0
=============================================================================
step 1 - Install Windows 3.0 on your system as per instruction from MicroSoft.
step 2 - Copy unzipped Windows 3.0 drivers to a blank formatted diskette.
Label diskette "EV-673 Windows 3.0 Drivers".
step 3 - Have your Windows 3.0 install diskettes as well as the Everex
driver diskette containing the Windows 3.0 drivers ready.
step 4 - Change to the directory Windows 3.0 is installed. From DOS, run
the Windows SETUP program. (DO NOT run SETUP from within windows.)
step 5 - When SETUP displays your current configuration, move the highlight
bar up to the 'Display:' line, and press [ENTER].
step 6 - Move the highlight down to the bottom of the list of display drivers
to the one marked 'Other (Requires disk provided by a hardware
manufacturer.)' and press [ENTER].
step 7 - Insert your diskette containing these Windows v3.0 drivers in
to your drive A: slot.
step 8 - When SETUP prompts you where the drivers are located, type 'A:\'
step 9 - Select the resolution in which you wish to use Windows v3.0.
step 10- Exit SETUP. SETUP may prompt you for other diskettes, including
the Windows 3.0 installation diskettes.
step 11- Windows v3.0 is now configured to use the new, higher resolution mode.
=============================================================================